Montero Sport XLS 4WD V6-3.5L SOHC (2002)
1.
If the compass requires manual calibration, the "Need to calibrate the compass" message will appear on the display for about 7-seconds and the
direction indicator will blink. Press the CAL COMP function button.
NOTE:
If the CAL COMP button is not pressed within the 7-second period, the display will change to a blank compass screen. If this happens, it will be
necessary to again re-calibrate the compass by repeating steps 1 through 4.
2.
Confirm this screen then follow the on-screen instructions.
3.
Drive the vehicle slowly through a 360° turn in either direction in a safe, open space with no other vehicles or buildings around. This will
automatically complete the adjustment, calibrating the compass to the correct azimuth.
4.
After driving in circles, the adjustment completes automatically, and this message displays verifying completion of adjustment.
NOTE:
a) The compass can only be adjusted at speeds of less than 2 mph (3 km/h).
b) The display may sometimes show the adjustment completion message when the vehicle begins to turn but then returns to showing the original
compass direction. In this case, the compass has not adjusted itself correctly Make sure to turn the vehicle completely through a 360° turn.
