Montero Sport XLS 4WD V6-3.5L SOHC (2002)
Brake Light Switch: Testing and Inspection
STOPLIGHT SWITCH CHECK
Connect an ohmmeter to the stoplight switch, and check the continuity by pushing in and releasing the stoplight switch. The stoplight switch is in good
condition if there is no continuity when the plunger is pushed in to a depth of within 4 mm (0.2 inch) from the outer case edge surface, and if there is
continuity when it is released. For vehicles with auto-cruise control system, check the continuity between the terminals "a" and "b" of the stoplight
switch.
