mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Fog/Driving Lamp Relay > < Door Switch|Testing and Inspection
Page 1
background image

Fog/Driving Lamp Bulb: Service and Repair

BULB REPLACEMENT

1. Remove the fog light.
2. Loosen the shown screws to remove the cover.

CAUTION:
-

Do not touch the surface of the bulb with hands or dirty gloves. If the surface does become dirty, clean it with alcohol or thinner, and let it dry
thoroughly before installing.

-

Improper installation of the under cover causes a unit Make sure that the under cover is installed properly.

3. Unlock the spring which secures the bulb and then remove the bulb.

Fog/Driving Lamp Relay > < Door Switch|Testing and Inspection