Montero Sport XLS 4WD V6-3.5L SOHC (2002)
11. Check that the A/T fluid level is at the "COLD" mark on the dipstick. If the level is lower than this, pour in more A/T fluid.
12. Drive the vehicle until the A/T fluid temperature rises to the normal temperature [70 - 80°C (158 - 176°F)], and then check the A/T fluid level
again. The A/T fluid level must be at the "HOT" mark.
NOTE: The A/T fluid temperature is measured with scan tool (MUT II). The "COLD" level is for reference only; the "HOT" level should be
regarded as the standard level. If it takes some amount of time until the A/T fluid reaches its normal operating temperature [70 - 80°C (158 - 176°
F)], check the A/T fluid level.
13. Firmly insert the dipstick into the oil filler tube.
14. When A/T fluid is under the specified level, pour in more A/T fluid. When A/T fluid is under the specified level, drain the excessive A/T fluid
from the drain plug to adjust A/T fluid level to the specified level.
