Montero Sport XLS 4WD V6-3.5L SOHC (2002)
>>B<< SNAP RING INSTALLATION
Install the snap ring so that the tapered surface is to the outside.
>>C<< ARMATURE PLATE INSTALLATION
Align the serration protrusion on the crankshaft with the notch on the armature and install.
>>D<< NUT INSTALLATION
Use special tools MB991367 and MB991386 to hold the magnetic clutch, and tighten the nut in the same manner for removal.
>>E<< AIR GAP ADJUSTMENT
Check whether or not the air gap of the clutch is within the standard value.
Standard value: 0.3 - 0.5 mm (0.01 - 0.02 inch)
NOTE: If there is a deviation of the air gap from the standard value, make the necessary adjustment by adjusting the number of shims.
