Montero Sport XLS 4WD V6-3.5L SOHC (2002)
This Service Campaign involves the following vehicles built before December 4, 2002. Eclipse GTS and Eclipse Spyder GTS models with variable
induction are NOT included in this service campaign.
2000-03 Galant 3.0L V6
2000-03 Eclipse 3.0L V6 without variable induction
2001-03 Eclipse Spyder 3.0L V6 without variable induction
2004-02 Montero
2001-03 Montero Sport
LABEL INSTALLATION
1.
Open the hood, locate the Vacuum Hose Routing Diagram label, and inspect the part number listed on the label.
a.
If the part number is NOT the part number listed for the vehicle in the PARTS INFORMATION section of this bulletin, proceed with step 2
and install the new label.
b.
If the part number is the part number listed for the vehicle in the PARTS INFORMATION section of this bulletin, the label is correct and
does not require replacement
2.
Clean the old label thoroughly Of all dirt and residue.
3.
Carefully peel the backing strip from the new label and apply over the existing label.
4.
Close the hood.
