mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Ignition Coil (With Built-In Ignition Power Transistor) Check|Page 2746 > < Ignition Coil (With Built-In Ignition Power Transistor) Check|Page 2744
Page 1
background image

Ignition Control Module: Testing and Inspection
Ignition Power Transistor Continuity Check

IGNITION COIL POWER TRANSISTOR CONTINUITY CHECK

NOTE:  An analog-type ohmmeter should be used.

Number 1 and Number 4 cylinder side coil

Number 2 and Number 5 cylinder side coil

Number 3 and Number 6 cylinder side coil

Replace the ignition power transistor if there is a malfunction.

Ignition Coil (With Built-In Ignition Power Transistor) Check|Page 2746 > < Ignition Coil (With Built-In Ignition Power Transistor) Check|Page 2744