Montero Sport XLS 4WD V6-3.5L SOHC (2002)
software database information on the Diamond Dealer Link and in MEDIC. Reprogram the new PCM if necessary.
12.
If the PCM can be reprogrammed, the MUT-II will display, "Do you want to reprogram this ECU?" Press "YES".
13.
The MUT-II will display this screen as it reprograms the PCM. It will take approximately 15 minutes to complete.
CAUTION
DO NOT DISTURB THE HARNESS CABLES OR CONNECTIONS. INTERRUPTION DURING THE PROGRAMMING PROCESS
COULD CAUSE THE PCM TO LOSE DATA OR PREVENT FUTURE PCM REPROGRAMMING.
14.
When the screen displays "Completed," press "C".
If reprogramming does not complete, repeat this process as instructed on the MUT-II screen.
To verify that the correct reprogramming has been made, the ROM ID number will display on the MUT-II screen. Note this number. The table in
Attachment A lists the ECU part numbers and ROM ID numbers that should display after reprogramming.
15.
Turn the ignition key to OFF and disconnect the MUT-II. Reprogramming is complete.
THE FOLLOWING STEPS ARE REQUIRED BY LAW:
16.
Using a ball-point pen, enter the appropriate PCM part number, ROM ID #, this TSB number (TSB-03-13-001), your dealer code, and the current
date on the Engine Compartment label and Control Module label (part no. MSSF-024G-00).
