Montero Sport XLS 4WD V6-3.5L SOHC (2002)
1. Loosen the upper arm mounting bolts and nuts.
NOTE: Remove the shock absorber mounting nut and jam nut, compress the shock absorber and loosen the upper arm mounting bolts and nuts.
CAUTION:
^
Difference in shim thickness between front and rear must be 4 mm (0.6 inch) or less.
^
Do not use 4 or more shims at one location.
2. Increase or decrease shims between the upper arm shaft and crossmember to adjust the camber and caster.