Montero Sport XLS 4WD V6-3.5L SOHC (2002)
NOTE: Only loosen mounting nut, do not remove it from the ball joint.
INSTALLATION SERVICE POINT
>>A<< PITMAN ARM AND RELAY ROD CONNECTION
Apply the specified grease to the top (lip) of the dust cover.
Specified grease: Multipurpose grease SAE J310, NLGI No.2 or equivalent
INSPECTION
PITMAN ARM DUST COVER CHECK
1. Press the dust cover with a finger to check whether the dust cover is cracked or damaged.
2. If there are any cracks in or damage to the dust cover, replace the pitman arm.
NOTE: Cranked or damaged dust cover may cause damage to the ball joint. In addition, if the dust cover is damaged during service work, replace
the dust cover.
