mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3060 > < Initial Inspection and Diagnostic Overview
Page 1
background image

Shift Interlock: Symptom Related Diagnostic Procedures

1: Selector Lever CAN Be Moved

INSPECTION PROCEDURE 1: Selector Lever can be Moved from "P" to "R" Position without Depressing Brake Pedal when Ignition Key is
at Positions other than "LOCK" (OFF) Position.
 

TECHNICAL DESCRIPTION (COMMENT) 

Lock cam or shift lock cable may be defective.

TROUBLESHOOTING HINTS 

^

Malfunction of lock cam

^

Malfunction of shift lock cable

DIAGNOSIS 

STEP 1. Check the fit of the lock cam. 
Q: Is the lock cam installed correctly? 

YES: Go to Step 2.
NO: Install the lock cam correctly. When the brake pedal is released with the ignition key at other positions than "LOCK" (OFF) position, check
that the selector lever can not be moved from "P" position to "R" position.

STEP 2. Check the lock cam. 
Q: Is the lock cam in good condition? 

YES: Go to Step 3.
NO: Replace the lock cam. When the brake pedal is released with the ignition key at other positions than "LOCK" (OFF) position, check that the
selector lever can not be moved from "P" position to "R" position.

STEP 3. Check the fit of the shift lock cable. 
Q: Is the shift lock cable installed correctly? 

YES: Go to Step 4.
NO: Install the shift lock cable correctly. When the brake pedal is released with the ignition key at other positions than "LOCK" (OFF) position,
check that the selector lever can not be moved from "P" position to "R" position.

STEP 4. Check the shift lock cable. 
Q: Is the shift lock cable in good condition? 

YES: No action to be taken.
NO: Replace the shift lock cable. When the brake pedal is released with the ignition key at other positions than "LOCK" (OFF) position, check
that the selector lever can not be moved from "P" position to "R" position.

2: Selector Lever Cannot Be Moved

INSPECTION PROCEDURE 2: Selector Lever cannot be Moved from "P" to "R" Position with Brake Pedal Depressed when Ignition Key is
at Positions other than "LOCK" (OFF) Position.
 

TECHNICAL DESCRIPTION (COMMENT) 

Selector lever assembly, shift lock cable, key interlock cable, transmission control cable, or lock cam may be defective.

Initial Inspection and Diagnostic Overview|Page 3060 > < Initial Inspection and Diagnostic Overview