mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Propeller Shaft - Shudder/Suspension Bottoming Out|Page 3409 > < Propeller Shaft - Shudder/Suspension Bottoming Out
Page 2
background image

IMPORTANT:

The mark on the bracket must face the front of the vehicle.

a.

Tighten the three bracket bolts to 71 Nm (52 ft/lbs).

b.

Tighten the helper damper bolt to 71 Nm (52 ft/lbs).

PARTS INFORMATION

Use the Genuine Mitsubishi Parts as shown.

WARRANTY INFORMATION

Special Warranty Information: Perform repair on a customer complaint basis only. This repair must be pre-authorized by your District Parts and Service

Propeller Shaft - Shudder/Suspension Bottoming Out|Page 3409 > < Propeller Shaft - Shudder/Suspension Bottoming Out