Montero Sport XS 2WD V6-3.5L SOHC (2001)
WARNING:
-
Always replace both brake pads on each wheel as a set froth front wheels or both rear wheels). Failure to do so with result in uneven
braking, which may cause unreliable brake operation.
-
If there is significant difference in the thickness of the pads on the left and right sides, check the sliding condition of the piston, lock pin
and guide pin.
Measure thickness at the thinnest and most worn area of the pad. Replace the pad assembly if pad thickness is less than the limit value.
Standard value: 10.0 mm (0.39 inch)
Minimum limit: 2.0 mm (0.08 inch)
Replacement
REMOVAL AND INSTALLATION
Required Special Tool:
-
MB990520: Disc Brake Piston Expander
Installation Service Point
>>A<< Front Brake Assembly Installation
