Montero Sport XS 2WD V6-3.5L SOHC (2001)
NO: Check the relevant input signal circuit.
STEP 3. Check the input signal (by using a voltmeter).
Check the input signals from the following switches:
-
Ignition switch (IG1)
-
Key reminder switch
-
All door switch
-
Liftgate switch
1. Use special tool MB991529 to connect a voltmeter between ground terminal 4 or 5 and ETACS-ECU terminal 9 of the data link connector.
2. Check that the voltmeter indicator deflects once when the input signal enters.
Q: Does the voltmeter indicator deflect?
YES: Replace the ETACS-ECU. The dome light and cargo space light dimming function should work normally.
NO: Check the relevant input signal circuit.