Montero Sport XS 2WD V6-3.5L SOHC (2001)
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.
Disconnect the negative (-) battery cable from the battery an tape the terminal to prevent accidental connection and air bags deployment.
[[B]] AIR BAG MODULE REMOVAL (DRIVER'S SIDE)
1. Remove the air bag module mounting screws (TORX(R) screws) at the sides of the steering wheel.
NOTE: Do not remove the screws from the holders.
CAUTION: When disconnecting the air bag module-to-clock spring connector, take care not to apply excessive force to it.
WARNING: The removed air bag module should be stored in a clean, dry place with the pad cover face up.
2. When disconnecting the connector of the clock spring from the air bag module, press the air bag's lock toward the outer side to spread it open. Use
a flat-tipped screwdriver, as shown in the figure at the left, to pry gently to remove the connector.
[[C]] STEERING WHEEL REMOVAL
CAUTION: Do not hammer on the steering wheel. Doing so may damage the collapsible column mechanism.
[[D]] CLOCK SPRING REMOVAL
WARNING: The removed clock spring should be stored in a clean, dry place.
[[E]] AIR BAG MODULE REMOVAL (FRONT PASSENGER'S SIDE)
WARNING: The removed air bag module should be stored in a clean, dry place with the ad cover face up.
INSTALLATION SERVICE POINTS
