Montero Sport XS 2WD V6-3.5L SOHC (2001)
Air Bag Control Module: Service and Repair
Air Bag Module(s) and Clock Spring
REMOVAL AND INSTALLATION
WARNING:
-
Never attempt to disassemble or repair the air bag modules or clock spring. If faulty, replace it.
-
Do not drop the air bag modules or clock spring or allow contact with water, grease or oil.
-
Replace it if a dent, crack, deformation or rust is detected.
-
The air bag modules should be stored on a flat surface and placed so that the pad surface is facing upward. Do not place anything on top
of It.
-
Do not expose the air bag modules to temperatures over 93 °C (200 °F).
-
After deployment of an air bag, replace the air bag modules. Check the clock spring, and if faulty, replace It with a new part.
-
Wear gloves and safety glasses when handling air bags that have already deployed.
-
An underplayed air bag module should only be disposed of in accordance with the procedures.
Air Bag Module (Driver's Side), Clock Spring
