Montero Sport XS 2WD V6-3.5L SOHC (2001)
Impact Sensor: Service and Repair
Sensor Cable Installation
If there is a malfunction in the front wiring harness between the front impact sensor and body wiring harness, install and route a new sensor cable.
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
WARNING: Battery poets, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.
1. Disconnect the negative (-) battery cable and tape the terminal to prevent accidental connection and air bags deployment.
2. Make a cut in the grommet in the place shown in the illustration, and pass the sensor cable through the cut.