mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 733 > < Symptom Related Diagnostic Procedures|Page 731
Page 23
background image

STEP 9. Check the input signal from the key reminder switch.

Check that the tone alarm stops sounding when terminal number 6 is grounded.

Q: Is the tone alarm stops sounding?

YES: Go to Step 10.

NO: Go to Step 11.

STEP 10. Check the key reminder switch connector D-16 for damage.

Q: Is the key reminder switch connector D-16 in good condition?

YES: Go to step 11

NO: Repair or replace it. Refer to Harness Connector Inspection.

STEP 11. Check the harness wire between key reminder switch connector D-16 and body ground.

Q: Is the resistance wore between key reminder switch D-16 and body ground

YES: Replace the ETACS-ECU. Then Go to Step 12.

NO: Repair or replace it. Refer to Harness Connector Inspection.

Symptom Related Diagnostic Procedures|Page 733 > < Symptom Related Diagnostic Procedures|Page 731