mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Battery Check|Page 4268 > < Battery Check|Page 4266
Page 2
background image

2. Load the battery at the recommended discharge rate (See LOAD TEST RATE CHART) for 15 seconds.
3. Read voltage after 15 seconds, then remove load.

Load Test Chart

4. Compare the measured value with the minimum voltage. (See LOAD TEST CHART.)

Q: Is the voltage higher than minimum voltage?

NO: Replace the battery. Then go to Step 4. 

YES: The battery is normal.

Battery Check|Page 4268 > < Battery Check|Page 4266