mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

All Other Service Bulletins for Drive/Propeller Shaft: > < Propeller Shaft - Vibration Between 40 to 50 mph
Page 2
background image

The improved rear propeller shaft part number listed in this bulletin is the same part number as the original part. Inspect the lot number on the
replacement shaft label to determine whether it is the improved part. Lot numbers higher than 000529 are the improved propeller shafts.

6.

When installing the new shaft, align the mating mark made in Step 4 with the decal on the new propeller shaft.

7.

Test drive to confirm that the vibration has been reduced.

NOTE

Some rear differential flanges may have incorrect phasing markings. If the new propeller shaft does not minimize the low-frequency vibration, the
shaft may need to be rotated 180 degrees opposite the phasing marks.

PARIS INFORMATION
Repair kits include a rear propeller shaft and protective bubble wrap.

WARRANTY INFORMATION
Normal warranty procedures apply.

All Other Service Bulletins for Drive/Propeller Shaft: > < Propeller Shaft - Vibration Between 40 to 50 mph