Montero SR 4WD V6-3.5L SOHC (1997)
1. Using isopropyl alcohol, degrease the body surface on which the side garnish is mounted.
2. If a new side garnish is used, peel off the release paper from the surfaces to which adhesive is to be applied. If the old side garnish is to be reused,
remove adhesive as indicated. Then, apply double coated tape [5mm (.2 in.) wide and 1 mm (.04 in.) thick], dry adhesive to the areas shown in
the illustration.
3. Install the side garnish so that the clips match the body holes.
NOTE: If the double-sided adhesive tape is difficult to affix during winter, etc., warm the bonding surfaces of the body and the side garnish
before affixing the tape.
Body: 40-60 degrees C(104-140 degrees F)
