Montero SR 4WD V6-3.5L SOHC (1997)
CAUTION:
-
Protect the caliper body with a cloth, and then blow compressed air through the brake hose to remove the piston boot and the piston.
-
Blow compressed air gently.
5. Remove the piston seal and caliper body. Remove piston seal with finger tip.
CAUTION: Do not use a screwdriver or other tools in order to prevent damage to the inner cylinder.
NOTE: Clean the piston surface and the inner cylinder with trichloroethylene, alcohol, DOT 3 or DOT 4 brake fluid.