Montero SR 4WD V6-3.5L SOHC (1997)
Brake Bleeding: Service and Repair
Without ABS
1. Start the engine and bleed the air in the sequence shown in the figure.
2. Pump the brake pedal 3-4 times. With the pedal depressed, have a helper momentarily open the first bleeder screw. Do not release the brake pedal
until the bleeder screw is tightened.
3. Repeat 2-3 times and move on to the next bleeder screw in the illustration.
4. Repeat until all air is purged from the hydraulic system.
CAUTION: Use the specified brake fluid. The specified brake fluid is DOT 3 or DOT 4. Avoid using a mixture of the specified brake fluids and
other fluids. When supplying brake fluid for vehicles with ABS, the filter/strainer should be installed to the master cylinder reserve tank.