Montero SR 4WD V6-3.5L SOHC (1997)
DISASSEMBLY AND ASSEMBLY
1. Remove the lock pin and guide pin.
2. Remove the bushing and caliper support (pad, clip and shim.)
3. Remove the pin boot, boot ring and piston boot.
4. Pump in compressed air through the brake hose installation hole and remove the pistons and piston boot.
CAUTION:
-
When removing the pistons, be sure to use the handle of a plastic hammer and adjust the height of the two pistons while pumping in air slowly
in so that the pistons protrude evenly.
-
Do not remove one piston completely before trying to remove the other piston because it will become impossible to remove the second piston.
