Montero SR 4WD V6-3.5L SOHC (1997)
Idle Speed: Adjustments
Fixed SAS Adjustment
NOTE:
1. The fixed SAS has been factory-adjusted. Never attempt to move it.
2. If the adjustment is incorrect, adjust by following the procedure given below.
(1) Sufficiently slacken the accelerator cable.
(2) Loosen the lock nut on the fixed SAS.
(3) Sufficiently loosen the fixed SAS by turning it counter clockwise to fully close the throttle valve.
(4) Turn the fixed SAS clockwise slowly to find a point at which it contacts the throttle lever (where the throttle valve starts opening). From that
point, tighten the fixed SAS further 1 1/4 turns.
(5) While holding the fixed SAS to prevent it from turning, tighten the lock nut securely.
(6) Adjust the accelerator cable tension.
(7) Adjust the basic idle speed.
(8) Adjust the closed throttle position switch and throttle position sensor (TPS).