Montero SR 4WD V6-3.5L SOHC (1997)
Power Steering Pressure Switch: Testing and Inspection
INSPECTION
Using Scan Tool
Checking Fluid Pressure
HARNESS INSPECTION
STEP 1. Check for an open or short-circuit between the power steering pressure switch and the engine control module.
-
Power steering pressure switch connector: Disconnected
-
Engine control module connector: Disconnected
OK: GO TO STEP 2
NG: Repair the harness. (A1 - 37)
STEP 2. Measure the applied voltage.
-
Power steering pressure switch connector: Disconnected
-
Engine control module connector: Connected
-
Ignition switch: ON
Voltage (V): Battery positive voltage
OK: STOP
NG: Replace the engine control module.