Montero SR 4WD V6-3.5L SOHC (1997)
Throttle Full Close Switch: Testing and Inspection
TROUBLESHOOTING HINTS
If there is an abnormal condition of the closed throttle position switch output even though the results of the checking of the closed throttle position switch
harness and of the component itself indicate a normal condition, the cause is probably one of the following.
-
Voltage within the engine control module is applied, by way of the resistance, to the closed throttle position switch. When the foot is taken off the
accelerator, the closed throttle position switch is switched ON, so the current is grounded. As result, the closed throttle position switch terminal
voltage changes from HIGH to LOW level.
(1) Incorrect adjustment of the accelerator cable or the cruise-control cable.
(2) Incorrect adjustment of the fixed SAS.
