Montero SR 4WD V6-3.5L SOHC (1997)
2. When disconnecting the connector of the clock spring from the air bag module, press the air bag's lock toward the outer side to spread it open. Use
a screwdriver to pry gently as shown in the figure at the left, to remove the connector.
CAUTION:
1. Wait disconnection the air bag module-clock spring connector, take not to apply excessive force to it.
2. The removed air bag module should be stored in a clean, dry place with the pad cover face up.
Step 4: Steering Wheel Removal
CAUTION: Do not hammer on the steering wheel. Doing so may damage the collapsible column mechanism.
PRE-INSTALLATION INSPECTION
1. When installing the new air bag module and clock spring, refer to "INSPECTION"
CAUTION: Dispose of an air bag module only according to the specified procedure.
2. Connect the battery (-) terminal.
3. Connect the scan tool to the data link connector then check diagnostic codes.
CAUTION: Turn the ignition switch off before connecting or disconnecting the scan tool.
4. Turn the ignition key to the "ON" position.
5. Conduct diagnostic test using the scan tool to ensure entire SRS operates properly.
