Montero SR 4WD V6-3.5L SOHC (1997)
A. Snap ring installation. (19)
B. First & reverse brake piston No. 2 removal. (21)
1. With the first & reverse brake piston No. 2 held, blow air into the transmission case through the oil hole to remove the first & reverse brake
piston No. 2.
CAUTION: Do not blow air suddenly because the piston may be tipped and become hard to remove.
C. Brake reaction sleeve removal. (23)
1. With the brake reaction sleeve held, blow air into the transmission case through the oil hole to remove the brake reaction sleeve.
CAUTION: Do not blow air suddenly because the sleeve may be tipped and become hard to remove.
D. First & reverse brake piston No. 1 removal. (25)
1. With the first & reverse brake piston No. 1 held, blow air into the transmission case through the oil hole to remove the piston.
CAUTION: Do not blow air suddenly because the piston may be tipped and become hard to remove.
INSPECTION
