Montero SR 4WD V6-3.5L SOHC (1997)
1. Aligning the convex of the thrust washer No. 1 with the hole of the rear planetary gear, install the washer to the gear.
2. Turn the rear planetary gear over. Aligning the convex of the thrust washer No. 2 with the hole of the rear planetary gear, install the washer
to the gear.
G. One-way clutch No. 2 installation. (8)
1. Install the one-way clutch No. 2 to the rear planetary gear in the illustrated direction.
H. One-way clutch inner race installation. (6)
1. After the one-way clutch inner race is installed, check the operation of the one-way clutch No. 2 as follows:
2. While holding the rear planetary gear, turn the one-way clutch clockwise to see that the clutch is locked and turn it counterclockwise to see
that the clutch turns.