Montero SR 4WD V6-3.5L SOHC (1997)
7. Put a new valve body gasket No. 2 on the plate.
8. While pushing the gaskets and the plate against the upper valve body, put the upper valve body on the lower valve body.
CAUTION: Be careful not to drop the check balls and strainers from the upper valve body.
9. Insert the 25 bolts from the upper valve body side.
A: 38 mm (1.50 inch)
B: 20 mm (0.79 inch)
C: 28 mm (1.10 inch)
10. Install the manual valve to the lower valve body.
11. Install the detent spring and cover by tightening the bolt.