mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Brake Fluid Accumulator > < Brake Fluid Types|Page 4000
Page 4
background image

7. Open the bleeder valve 1/8 turn briefly to allow any remaining air to escape, then close the bleeder valve.
8. Repeat steps (6) and (7) as many times as necessary to eliminate all air in the line.
9. Repeat steps (1) - (8) at the LH caliper.

3. Adjust the brake fluid level as follows:

1. Turn the ignition switch to the "LOCK" OFF) position.
2. Depress the brake pedal repeatedly (up to 40 times or more) until its depressing force suddenly feels very heavy (no pedal travel).
3. Release the brake pedal.
4. Adjust the brake fluid level between the "MIN" and "MAX" marks on the reservoir.

Brake Fluid Accumulator > < Brake Fluid Types|Page 4000