Montero XLS 4WD V6-3.5L SOHC (2001)
Intake Manifold: Testing and Inspection
INTAKE MANIFOLD CHECK
Check the following points: replace the part it a problem is found.
1. Check for damage or cracking of any part.
2. Clogging of the negative pressure (vacuum) outlet port, or clogging of the gas passages.
3. Check deflection of installation surface with straight edge and feeler gauge.
Standard value: 0.15 mm (0.006 inch) or less
Limit: 0.20 mm (0.008 inch)
