mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Lamps and Indicators - Engine > < Intake Manifold Torque and Sequence|Page 1372
Page 3
background image

>>B<< INTAKE MANIFOLD INSTALLATION

Tighten the nuts by the following procedure.

>>C<< FUEL PRESSURE REGULATOR/HIGH-PRESSURE FUEL HOSE INSTALLATION

CAUTION: Be careful not to allow any engine oil to enter the fuel rail.

When connecting the fuel pressure regulator and the high-pressure fuel hose to the fuel rail, apply a small amount of new engine oil to the O-ring. Then
insert the high-pressure fuel hose, being careful not to damage the O-ring.

>>D<< INTAKE MANIFOLD PLENUM GASKET INSTALLATION

Install the gasket with the protrusion in the position illustrated.

Lamps and Indicators - Engine > < Intake Manifold Torque and Sequence|Page 1372