Montero XLS 4WD V6-3.5L SOHC (2001)
2. Using special tool MD998051 and a torque wrench, tighten the bolts to the specified torque in the order. (in two or three cycles)
Tightening torque: 108 ± 5 Nm (80 ± 3 ft. lbs.)
>>C<< O-RING INSTALLATION
CAUTION: Never apply lubricant such as engine oil to the O-ring.
Install the O-ring into the groove of the piper, and then apply water around the O-ring.
>>D<< GASKET/WATER PASSAGE ASSEMBLY INSTALLATION
Bend the tabs onto the water passage assembly. Then install the water passage assembly to the cylinder head so that the gasket doesn't slip.
