Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 3. Check the harness wires between ETACS-ECU connector D-222 and fusible link (1).
NOTE: After checking junction block connector D-211 and intermediate connector D-28, check the wires. If junction block connector D-211 and
intermediate connector D-28 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between ETACS-ECU connector D-222 and fusible link (1) in good condition?
YES: There is no action to be taken.
NO: Repair them. The central door locking system should work normally.
STEP 4. Check the junction block connector D-222 for damage.
Q: Is junction block connector D-222 in good condition?
YES: Go to Step 5.
NO: Repair or replace it. Refer to Harness Connector Inspection. The central door locking system should work normally.
