mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2052 > < Initial Inspection and Diagnostic Overview|Page 2050
Page 22
background image

STEP 3. Check the ETACS-ECU connector D-222 and driver's door lock actuator connector H-10 for damage.

Q: Are ETACS-ECU connector D-222 and driver's door lock actuator connector H-10 in good condition?

YES: Go to Step 4.
NO: Repair or replace them. Refer to Harness Connector Inspection. All doors should be locked or unlocked.

STEP 4. Check the harness wires between ETACS-ECU connector D-222 and driver's door lock actuator connector H-10.

Initial Inspection and Diagnostic Overview|Page 2052 > < Initial Inspection and Diagnostic Overview|Page 2050