Montero XLS 4WD V6-3.5L SOHC (2001)
NOTE: After checking junction block connector D-217 and intermediate connectors D-125 and F-12, check the wires. If junction block connector
D-217 and intermediate connectors D-125 and F-12 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between ETACS-ECU connector D-222 and rear door lock actuator (LH) connector H-13 in good condition?
YES: Replace the ETACS-ECU. All doors should be locked or unlocked.
NO: Repair them. All doors should be locked or unlocked.
STEP 11. Check the rear door lock actuator (RH) operation. Remove the rear door lock actuator (RH) to check. (Refer to Door-Door Handle
and Latch.)
Q: Is the rear door lock actuator (RH) in good condition?
YES: Go to Step 12.
NO: Replace the rear door lock actuator (RH). All doors should be locked or unlocked.
STEP 12. Check the ETACS-ECU connector D-222 and rear door lock actuator (RH) connector H-21 for damage.
