mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2058 > < Initial Inspection and Diagnostic Overview|Page 2056
Page 28
background image

Q: Are ETACS-ECU connector D-222 and rear door lock actuator (RH) connector H-21 in good condition?

YES: Go to Step 13.
NO: Repair or replace them. Refer to Harness Connector Inspection. All doors should be locked or unlocked

STEP 13. Check the harness wires between ETACS-ECU connector D-222 and rear door lock actuator (RH) connector H-21.

NOTE:  After checking junction block connector D-217 and intermediate connectors D-111 and F-23, check the wires. If junction block connector

Initial Inspection and Diagnostic Overview|Page 2058 > < Initial Inspection and Diagnostic Overview|Page 2056