mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2059 > < Initial Inspection and Diagnostic Overview|Page 2057
Page 29
background image

D-217 and intermediate connectors D-111 and F-23 are damaged, repair or replace them. Refer to Harness Connector Inspection.

Q: Are the harness wires between ETACS-ECU connector D-222 and rear door lock actuator (RH) connector H-21 in good condition?

YES: Replace the ETACS-ECU. All doors should be locked or unlocked.
NO: Repair them. All doors should be locked or unlocked.

STEP 14. Check the back door lock actuator operation. Remove the back door lock actuator to check. (Refer to Back Door-Back Door Handle
and Latch.)

Q: Is the back door lock actuator in good condition?

YES: Go to Step 15.
NO: Replace the back door lock actuator. All doors should be locked or unlocked.

STEP 15. Check the ETACS-ECU connector D-222 and back door lock actuator connector I-05 for damage.

Q: Are ETACS-ECU connector D-222 and back door lock actuator connector I-05 in good condition?

Initial Inspection and Diagnostic Overview|Page 2059 > < Initial Inspection and Diagnostic Overview|Page 2057