Montero XLS 4WD V6-35L SOHC (2001): Initial Inspection and Diagnostic Overview
YES: Go to Step 16.
NO: Repair or replace them. Refer to Harness Connector Inspection. All doors should be locked or unlocked.
STEP 16. Check the harness wires between ETACS-ECU connector D-222 and back door lock actuator connector I-05.
NOTE: After checking junction block connector D-217 and intermediate connectors D-111 and G-10, check the wires. If junction block connector
D-217 and intermediate connectors D-111 and G-10 are damaged, repair or replace them. Refer to Harness Connector Inspection.
