Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 8. Check power window main switch connector H-05 for damage.
Q: Is power window main switch connector H-05 in good condition?
YES: Go to Step 9.
NO: Repair or replace it. Refer to Harness Connector Inspection. The power windows should work normally.
STEP 9. Check the harness wires between power window main switch connector H-05 and ground.
NOTE: After checking intermediate connector D-25, check the wires. If intermediate connector D-25 is damaged, repair or replace it Refer to Harness
Connector Inspection.
Q: Are the harness wires between power window main switch connector H-05 and ground in good condition?
YES: There is no action to be taken.
NO: Repair them. The power windows should work normally.