Montero XLS 4WD V6-3.5L SOHC (2001)
2. Measure the resistance between terminal 5 and ground.
Q: Is the resistance less than 2 ohm?
YES: Go to Step 14.
NO: Go to Step 12.
STEP 12. Check the sunroof motor assembly connector F- 02 for damage.
Q: Is sunroof motor assembly connector F-02 in good condition?
YES: Go to Step 13.
NO: Repair or replace it. Refer to Harness Connector Inspection. The sunroof should work normally.
STEP 13. Check the harness wire between sunroof motor assembly connector F-02 and ground.
Q: Is the harness wire between sunroof motor assembly connector F-02 and ground in good condition?
YES: There is no action to be taken.
NO: Repair it. The sunroof should work normally.
