Montero XLS 4WD V6-3.5L SOHC (2001)
NOTE: After checking intermediate connectors A-05 and D-28 and junction block connectors D-221 and D-208, check the wires. If intermediate
connectors A-05 and D-28 and junction block connectors D-221 and D-208 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between wiper motor connector B-12 and ignition switch (ACC) in good condition?
YES: There is no action to be taken.
NO: Repair or replace them. The windshield wiper should stop at the predetermined park position.
STEP 5. Check the wiper motor connector B-12 and front-ECU connector A-08X for damage.
Q: Are wiper motor connector B-12 and front-ECU connector A-08X in good condition?
YES: Go to Step 6.
NO: Repair or replace them. Refer to Harness Connector Inspection. The windshield wiper should stop at the predetermined park position.