Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 6. Check rear wiper motor connector I-07 for damage.
Q: Is wiper motor connector I-07 in good condition?
YES: Go to Step 7.
NO: Repair or replace it. Refer to Harness Connector Inspection. The windshield wiper should work normally.
STEP 7. Check the harness wire between wiper motor connector I-07 and ground.
Q: Is the harness wire between wiper motor connector I-07 and ground in good condition?
YES: There is no action to be taken.
NO: Repair it. The windshield wiper should work normally.
STEP 8. Check the rear wiper motor connector I-07 and ETACS-ECU connector C-114 for damage.
Q: Are rear wiper motor connector I-07 and ETACS-ECU connector D-222 in good condition?
YES: Go to Step 9.
NO: Repair or replace them. Refer to Harness Connector Inspection. The rear wiper should work normally.
