mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2123 > < Initial Inspection and Diagnostic Overview|Page 2121
Page 93
background image

STEP 8. Check the rear washer motor connector I-08 and ETACS-ECU connector D-222 for damage.

Q: Are rear washer motor connector I-08 and ETACS-ECU connector D-222 in good condition?

YES: Go to Step 9.
NO: Repair or replace them. Refer to Harness Connector Inspection. The rear washer should work normally.

STEP 9. Check the harness wires between rear washer motor connector I-08 and ETACS-ECU connector D-222.

Initial Inspection and Diagnostic Overview|Page 2123 > < Initial Inspection and Diagnostic Overview|Page 2121