mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2129 > < Initial Inspection and Diagnostic Overview|Page 2127
Page 99
background image

STEP 9. Check the harness wire between headlight washer motor connector A-34 and front-ECU connector A-07X.

Q: Are the harness wire between headlight washer motor connector A-34 and front-ECU connector A-07X in good condition?

YES: Replace the front-ECU. The headlight washer should work normally.
NO: Repair it. The headlight washer should work normally.

J - Charts

Seat belt warning light: Seat belt warning light does not work normally

Initial Inspection and Diagnostic Overview|Page 2129 > < Initial Inspection and Diagnostic Overview|Page 2127