Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 9. Check the harness wires between key reminder switch connector D-202 and fusible link (2).
NOTE: After checking intermediate connector D-28, check the wires. If intermediate connector D-28 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
Q: Are the harness wires between key reminder switch connector D-202 and fusible link (2) in good condition?
YES: There is no action to be taken.
NO: Repair it. The ignition key hole illumination light should work normally.
