Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 10. Check key reminder switch connector D-202 and ETACS-ECU connector D-224 for damage.
Q: Are key reminder switch connector D-202 and ETACS-ECU connector D-224 in good condition?
YES: Go to Step 11.
NO: Repair or replace them. Refer to Harness Connector Inspection. The ignition key hole illumination light should work normally.
STEP 11. Check the harness wire between key reminder switch connector D-202 and ETACS-ECU connector D-224.
Q: Is the harness wire between key reminder switch connector D-202 and ETACS-ECU connector D-224 in good condition?
YES: There is no action to be taker.
NO: Repair or replace it. The seat belt warning light should work normally.
Inspection Procedure L-1
Headlight, taillight: Taillights do not illuminate
