mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2148 > < Initial Inspection and Diagnostic Overview|Page 2146
Page 118
background image

STEP 5. Check front-ECU connector A-07X for damage.

Q: Is front-ECU connector A-07X in good condition?

YES: Go to Step 6.
NO: Repair or replace it. Refer to Harness Connector Inspection. The headlights (low-beam) should illuminate normally.

STEP 6. Check the harness wire between front-ECU connector A-07X and battery.

Q: Is the harness wire between front-ECU connector A-07X and battery in good condition?

YES: Go to Step 7.
NO: Repair it. The headlights (low-beam) should illuminate normally.

STEP 7. Check headlight connectors A-20 and A-32 for damage.

Q: Are headlight connectors A-20 and A-32 in good condition?

YES: Go to Step 8.

Initial Inspection and Diagnostic Overview|Page 2148 > < Initial Inspection and Diagnostic Overview|Page 2146